home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-06
/
nwl200.zip
/
233.ASC
< prev
next >
Wrap
Text File
|
1991-10-29
|
3KB
|
81 lines
FYI
Note: The origin of this information may be internal or external
to Novell. Novell makes every effort within its means to verirfy
this information. However, the information provided in this
document is FOR YOUR INFORMATION only. Novell makes no explicit
or implied claims to the validity of this information.
TITLE: Installing a Client and Server
DOCUMENT ID#: FYI.P.6020
DATE: October 29, 1991
PRODUCT: NetWare Lite
PRODUCT VERSION: All versions
SUPERSEDES: NA
SYMPTOM: NA
ISSUE/PROBLEM
Installing a Client and Server
The computer you are installing NetWare Lite on must have a hard
disk to be configured as a server. Do not simply copy the files
off of the original (or backup) diskettes. To install NetWare
Lite and configure the computer as both server and client perform
the following steps. Note that, depending on your current setup,
the installation program may skip some of the steps.
1. Insert the diskette labeled "program" into the a: (or
b:) drive.
2. Type a:install and press enter.
3. Use the arrow keys to highlight "Make this machine a
client and a server" and press enter.
4. Type in a name for the server and press enter.
5. FILES must be set in the CONFIG.SYS file for the server
to run. The default value shown should work in most
situations. If you know that you need to use a
different value answer no to the "files" message and
edit CONFIG.SYS appropriately.
6. BUFFERS must be set in the CONFIG.SYS file for the
server to run. The default value shown should work in
most situations. If you know that you need to use a
different value answer no to the "buffers" message and
edit CONFIG.SYS appropriately.
7. Insert the diskette labeled "driver" into the a: drive
and press esc.
8. Use the arrow keys to highlight the type of network
card in your machine and press enter. If you are not
sure which card to choose refer to the hardware
documentation to determine what type of card you have
or which interface it is compatible with.
9. A window showing default settings for your card is
displayed. You may change these if necessary by
highlighting the item and pressing enter, then
highlighting the correct value and pressing enter.
Refer to the hardware documentation if you are not sure
what the settings should be. When the settings are
correct press esc.
10. Answer yes or no to the "path" message. Note that if
the C:\NWLITE directory is not in the DOS path you will
have to CD to it in order to use the net utility. You
will also have to include the path for every net
command executed at the command line.
11. Answer yes or no to the "lastdrive" message. Note that
LASTDRIVE should be set to g: or higher to use the NET
utility. If you answer no you must edit the CONFIG.SYS
file to include a LASTDRIVE command and reboot before
you can use any net command.
12. NetWare Lite is now installed. Press esc to exit the
installation program.